Mounting plate
Install the mounting plate
- Find a suitable spot to install the mounting plate, such as seat boxes or furniture surfaces, ensuring a minimum height of 8 cm from the floor. Ensure the area has sufficient stability and wall thickness; we recommend a 16 mm wooden wall for optimal support.
- Slightly sloped walls? No worries, use the plastic wedges to make it straight.
- Mark the spots for the drill holes. Use an 8 mm drill bit.
- Drill the holes. Place the washers and then the nuts onto the screws from the back.
- Tighten the nuts, attach the table leg, and ensure it’s securely fastened. To test the stability, carefully fit the leg, tighten it, and then gently apply some weight.
- You’re done!
Table leg system
Attach the table to the mounting plate
- Insert the table leg into the mounting plate rail.
- Tighten the handle on the table leg.
- Ensure the table leg is sturdy and the handle is securely fastened. To test, carefully apply weight to the leg from above. If necessary, tighten the handle again.
- Attach the Lagun arm with the under-table mounting plate and pre-assembled tabletop to the leg.
- Tighten the arm and tabletop to the desired level. Note that a tighter grip will make it more difficult to adjust the arm and tabletop. Important: Always keep the Lagun leg handle tightened while using the table.
- Great, now you can enjoy your new table! We suggest a tasty meal or perhaps a fun board game to celebrate.